First PEGASUS EXPERIMENT

[robomont]

thankyou thor,gold for you.

[robomont]

got the top cut off and old mercury disposed of.
gonna grind the top a little bit to make it level and smooth.
i am gonna try to use the flyback as a starter and if that doesnt work then im going with a mercury vapor lamp starter like armap was talking about.

washed my hands with soap and water after cleanup.safety first second and third.

[robomont]

so the gov was so scared of mercury vapor starter technology,not only did they ban the bulbs,they banned the starters too.
when i did a search for starters,i found a very few plus lots of info on the ban.

i can use other tech to get the job done.

ive currently decided to use silicone sealent to make a plug along with a sheet of new fiberglass to make coated with silicone to make a sort of condom for isolating the top tank from the bottom coil.this should isolate the two pieces and create a pollarity between both pieces.i may install the vacuum tip next to the top electrode.

then i can pull the vacuum on the coil.remove vacuum hose and install tank top.

next i will need to build a starter if the unit doesnt fire up on its own ,from atmospheric charge buildup.

[Elvis Hendrix]

Hey Robo,
Hows it goin man?
good to see you back on
Elvis.

[robomont]

this was my first design,yea drawing is crappy.

[robomont]

this is the new design.notice the yellow.thats the insulator .
it will isolate positive charges from negative charges.the green thing is the hv probe that makes contact with the top tank and charges it positive.notice how it doesnt touch the purple /iron tube.there is about 3/4 of an inch spacing from the sides.

also more good news.i was at a pawn shop and found a tazer with a two inch gap.
for 25$ !!!
i will be buying it and using it as my mercury vapor starter.it should have plenty of voltage.all i should have to do is solder a long metal probe onto one point of it.that way i can just walk up and touch it to unit to get it to fire up.kinda like starting a heart."clear,zap"

[robomont]

also,i forgot to add in the drawing,hv insulation between the the blue and purple to prevent arcing.this should totally isolate positive from negative.

[The Matrix Traveller]

As for myself, unlike yourself Robo, I have no need to say anything ....   

Except.... time exposes everything ....   

[thorfourwinds]

Greetings Esteemed Member Puffy   

Looking good, my friend, and we certainly appreciate the update and ALL the words.

Keep up with the good work and take the time to do it safely, please.

With great respect,



Hec'el oinipikte  (that we shall live)

tfw
Peace Love Light
Liberty & Equality or Revolution

FUKUSHIMA FALLOUT CLOCK
Elapsed Time since March 11, 2011, 2:46 PM - Fukushima, Japan

The World Must Take Charge at Fukushima

"In a time of universal deceit
telling the truth is considered a revolutionary act."
George Orwell

[robomont]

i get some of my motivation from myself but i also get alot from the faith my investors put in me.thankyou tfw.that goes for you too deuem.and all the peggy members.

[robomont]

these are the new materials that im using for insulator.acrylic caulk with silicone,bondo brand fiberglass mat,clear packing tape.

[robomont]

this is the upgrade,the top was cut off,the silcone was put around inside edge and rubber engine block plug installed,silicone was allowed to set up.
next i wrapped the fiber glass over the top and then around edges.the square corners and edges were caulked down.after thirty minutes,i wrapped it with clear packing tape.

i tested the resistence to make sure pin was isolated from iron tube.on 200k setting ,no reading.
then i checked capacitance,no reading.
then i checked for voltage in a 70% humidity room and got 1 volt dc.i believe this was charge buildup from the capacitance test,as the voltage showed one volt and quickly dropped to zero.
i intend to bake the unit in the sun to cure the silicone completely ,before testing.

i will be making a hole next to the pin for a vacuum tap.this hole will be in the rubber plug.
next i plan to expand  the inner diameter of the tank top,to fit the new insulated iron pipe end.

[robomont]

new drawing showing insulation around pipe ,showing pin/probe touching tank/top but being insulated from iron pipe.

[COSMO]

Robo,
Sounds like a mercury vapor bulb!



Cosmo

[robomont]

it basically is,with a magnetic field and iron instead of glass,plus no uv coating.