First PEGASUS EXPERIMENT

[1Worldwatcher]

the green line in center is steel pipe.the red is the ionizing ball/pollished freon bottle.the blue is the spiral high pressure tubing.welded at bottom and middle to make two circuits for plasma to flow through and make a giant magnetic field.
the pink is the ionizing hv field coming off top.the other green is the ions being pulled by the magnetic field.



sorry pic is sideways as done on droid.

sorry robo, can get the jest of what your design looks like, but am still not seeing the concept as it should be seen.

"Whats the 'bright Green' thing that looks like a broken coat hanger from the right ? Ambient atmosphere being dragged in for charging? And which direction is teh 'Polished Tank' going to be pointing, up or down?"

"What is it's displacement gradient from earths gravity?"

"Does or will this device have an Ionization tube or hv indicator?"

"How big is this device once it is assembled?"

"What will this be mounted in or on? Does it go directly into the ground?"

Sorry, would like to understand 'Better' of the whole concept and am getting a bit confused. I am assuming this is a concept based on no or minimum moving parts, maybe a drawing on paper then a snap shot of that drawing with explanation may serve too be prudent at this stage of the discussion.

1WW

[robomont]

[robomont]

the freon jug is for a round smooth surface.there are no moving parts except plasma flowing throughout.
the plasma charges the freon tank causing it to charge the air.the coil has a magnetic field that pulls the ionized air down.the air piles up under the engine creating lift and a vortex.its going to be three to four feet high.

i separared it into to pieces so it is easier to understand.

[ArMaP]

the coil has a magnetic field that pulls the ionized air down.the air piles up under the engine creating lift and a vortex.

Sorry for the question, but why does it pull the ionized air down and not up?

Thanks in advance.

PS: sometimes a hand drawing is the best way of explaining things.

[robomont]

depending on orientation .in electronics its called the right hand rule.it all depends on whether the spiral is wrapped clockwise or counter clockwise.

one direction will pull down.the other direction will pull up.

[1Worldwatcher]

the freon jug is for a round smooth surface.there are no moving parts except plasma flowing throughout.
the plasma charges the freon tank causing it to charge the air.the coil has a magnetic field that pulls the ionized air down.the air piles up under the engine creating lift and a vortex.its going to be three to four feet high.

i separared it into to pieces so it is easier to understand.

So, is it in the ground or is above the ground?

If it is above the ground, what is it being suspended by or pedestal-ed on?



Once the magnetic fields of desirability is achieved, how are you harnessing it?

And if you are claiming this device is Radiant receiver (of Sorts), with no moving parts, how are you going to achieve attainable dispersion of said magnetic fields? Are you going to create a board for amplification of EMF or is going to produce this with the acclimation of the Mercury Vapor?

Sorry for so many question's but would like too fully understand the design and why this design would do as you say it would. Curious as it were of how it is all going to come together.

1WW

[ArMaP]

depending on orientation .in electronics its called the right hand rule.

Oh, I forgot about that, I learned that at school, somewhere in the previous millennium.

[robomont]

its not a radient receiver.its a flying saucer engine.it will be mounted on a stand of bricks.it may work as a radient reciever at a later date as the vimanas talk of it being possible.right now im going for lift and the n crash back to earth.just proof of concept that it can lift itself and gain altitude.

[1Worldwatcher]

Oh, I forgot about that, I learned that at school, somewhere in the previous millennium.

Distinction between the right-hand and left-hand rule

Fleming's left-hand rule is used for electric motors, while Fleming's right-hand rule is used for electric generators.
Separate hands need to be used for motors and generators because of the differences between cause and effect.
In an electric motor, the electric current and magnet field exist (which are the causes), and they lead to the force that creates the motion (which is the effect), and so the left hand rule is used. In an electric generator, the motion and magnetic field exist (causes), and they lead to the creation of the electric current (effect), and so the right hand rule is used.
For example, many types of electric motors can also be used as electric generators. A vehicle powered by such a motor can be accelerated up to high speed by connecting the motor to a fully charged battery. If the motor is then disconnected from the fully charged battery, and connected instead to a completely flat battery, the vehicle will decelerate. The motor will act as a generator and convert the vehicle's kinetic energy back to electrical energy, which is then stored in the battery. Since neither the direction of motion nor the direction of the magnetic field (inside the motor/generator) has changed, the direction of the electric current in the motor/generator has reversed. This follows from the second law of thermodynamics. The generator current must oppose the motor current, and the stronger current outweighs the other to allow the energy to flow from the more energetic source to the less energetic source.
The rule for motors can be recalled by remembering that "motors drive on the left in Britain". The rule for generators can be recalled by remembering that either the letters "g" and "r" is common to both "right" and "generator", or the phrase "Jenny is always right" ("Genny" being a common shortened version of Generator).

Fleming's left-hand rule for motors

This is where I get a bit confused with in the concept of not having moving parts, not so much the Motor aspect of this theory, but because of and even though there are ambient EMF that is trappable, the generator would be the transference with in field amplification and power supply for acquirable and usable energy source.

Regardless of how the device is structured or materials used, we will always have impedance issues and also conversion issues. With known parameter's with in EMF as a natural entity, and knowing we can trap such energies with designed devices, we will still have to have something that is always going to be mechanical or moving parts for this amplification process, even Scalar technology has shown this to be fact, and the best example I have seen to date that doesn't require a lot of movable parts by way of model through experimentation is 'Vortex Technologies/Mathematics' which allows this power amplification process too take place with in the parameters of materials and applied minimal attracting charge.

1WW

[1Worldwatcher]

its not a radient receiver.its a flying saucer engine.it will be mounted on a stand of bricks.it may work as a radient reciever at a later date as the vimanas talk of it being possible.right now im going for lift and the n crash back to earth.just proof of concept that it can lift itself and gain altitude.

Well then, you should find this disclaimer very interesting robo:

ElectroGravitic Metal Combination

Magnesium/Bismuth Layering & Electrogravity

BISMUTH


Bismuth is a white, crystalline, brittle metal with a pinkish tinge. Bismuth is the most diamagnetic of all metals, and the thermal conductivity is lower than any metal, except mercury. It has a high electrical resistance, and has the highest Hall effect of any metal (that is, the greatest increase in electrical resistance when placed in a magnetic field). The metal is used as a thermocouple material (has highest negativity known).

MAGNESIUM
is used in computers for radio-frequency shielding.
ZINC
is used in photocopiers (conducts electricity when illuminated).

Vanguard Sciences comments


Years ago, while studying some old documents from a now defunct UFO group in England, I came across a short comment claiming that one of their members had done experiments with dissimilar metals. He used two disks of the same dimension and thickness but of two different materials, copper and zinc (as I recall, it was many years ago).

The disks were kept very close together and rotated in opposite directions. The claim was they levitated when spun, though the comment did not specify the requirement for high voltage as in the case of the Biefeld/Brown effect.

It was simply rotation of mass which is more consistent with Otis T. Carr, Bruce DePalma and Dr. Harold Aspden with their claims of anomalous inertial or gravitic effects associated with rotating mass.

Speaking of inertia and gravity reduction, an interesting story was told to me at the recent Low Level Energy Conference by Michael Roberts, President of the Association for Push Gravity Research.

One day a few years ago, he got a phone call at his home in Waco. It was from a fellow who had stopped in Waco and wanted to meet Michael at a local mall. Michael drove out there and the man was parked, in his late model Jeep in a remote section of the parking lot. They shook hands and talked a bit.

The man said he would like to show Michael what he had been working on. The Jeep engine was off, the vehicle was put in neutral and was not braked in any way. Michael was asked to push the vehicle. He did so with both hands, meeting an expected amount of resistance before he got it moving.

The man got in and braked the vehicle. He then showed Michael 4 mystery boxes (each about 12" X 6" X 4") mounted in the top of each wheel well of the Jeep. Each box had an electrical cable that led under the hood. Michael was not allowed to see under the hood.

Immediately after the push test, the man got in the Jeep and flicked a toggle switch which had been installed under the dashboard. Michael was then asked to push the Jeep again, this time it moved with the light touch of one hand.

The man would say nothing about the secret to this miracle was accomplished, he just wanted to show Michael that it was possible and there were those who had achieved it. This startling anecdote of course caused me to ask who the guy was, you know phone number, address and such. Michael said he'd misplaced that information but he remembered the Jeep had KANSAS LICENSE PLATES.....

Kind of fits doesn't it since the Wizard of OZ has definite links to Kansas, eh, Dorothy?

In discussing this with my friend Dan Davidson, he suggested the four boxes acted to provide a stabilized buoyancy type field, like pontoons on a boat. The use of only one would deflect the incoming gravity in one localized area, thus creating an imbalance. Whereas one unit over each wheel would equally distribute the deflection around the center of mass of the Jeep. Makes sense to me.

There is fuller details of the interview that had taken Place on C2C with Art Bell, and may be the information for materials that could prove too reveal quite amazing results.

Roswell Elctrogrvatics Material

Sorry for all the question's robo, makes more sense seeing you have no energy containment type of implication's, and the above story should get your attention, as it did and has gotten mine over the last few years.

1WW

[robomont]

yes i have read many theories but they are all way to complicated.i prefer kis.its obvious this is what the gods and world govs are using and so this is the method i shall use.freedom or chaos is at hand.
now to get the angels to help.
100$ +- will get you a stake in it.shooting for beginning purchases of materials 4th of next month.basically i need the tubing and mercury.the other stuff i got already.
this invitation of investment goes out to all members.

[robomont]

i have recieved deuems investment.thankyou.plan is coming together.

[robomont]

http://www.sciencecompany.com/Mercury-Metal-quicksilver-3X-Distilled-12lb-P16388.aspx here is where i will buy the mercury from.its 99$ plus about 17$ shipping.

[robomont]

well thor said he wasnt going to invest a hundred.he decided on two hundred.so ive got enough money now to get almost everthing.started an account for the funds .the bank wouldnt let me put pegasus in the title of account so had to start it in my name.no biggy.i will be posting receipts so yall know where the money is being spent.will be adding my money as needed to finish up the final details.will be ordering materials soon.

thankyou thor and deuem for having faith in me and this project.

[robomont]

deposit slips